CMI#W

MULTI-PURPOSE CYLINDERS, SPRING RETURN WITH IMPERIAL THREAD

force: 5-100t
stroke: 25-325mm
max working pressure: 700bar

Features

All the CMI cylinders have collar threads on the cylinder body and mounting holes in the base. They are supplied with an interchangeable grooved pushing saddle and models above 30 tonne are supplied with a handle for the carrying. A wiper seal is fitted on models above 5 tonne to prevent the penetration of dirt and to extend the life of the cylinder.

OPERATIONAL AREAS

These cylinders can be operated in any position and are extremely versatile and suitable for different applications, including industrial works, steel structural works, presses and special applications. The nitride treatment gives these cylinders an excellent resistance to corrosion and makes them particularly suitable to operate in the open air or in aggressive environments.

ACCESSORIES :
– ZTT tilt saddle reduces the effects of any possible off-centred load.
– Base plates. ZAB
– Clevis eyes. ZAR and ZAE

STANDARD :
– Base mounting holes.
– Pushing saddle prevents any risk of rod deformation.



It’s important to drop the pressure inside the cylinder before disconnecting the quick coupler to avoid problems if re-inserting or lowering the load. In case some pressure persists it is possible to use the apposite tool KTS38 in order to lower the pressure in the couplers.



To operate with these cylinders the MD power units are particularly suitable.

Selection chart

PUSHING FORCE	STROKE	EFFECTIVE AREA	OIL VOLUME	MODEL	CLOSED HEIGHT	Ø EXTERNAL	Ø PISTON	Ø ROD	COUPLER HEIGHT	Ø HOLLOW SADDLE	ROD PROJECTION	ROD INTERNAL THREAD	ROD THREAD DEPTH	Ø PCD MOUNTING HOLES	MOUNTING HOLES DEPTH	COLLAR THREAD COLLAR LENGTH	WEIGHT	* Nominal value, for precise capacity see kN
t* kN	mm	cm²	cm3	MODEL	A mm	D mm	E mm	F mm	H mm	J mm	K mm	O mm	P mm	U mm	V / Z mm	W / X mm	kg
5 43	25	6.1	15.5	CMI5W25	105	38	28	25	19	24.5	5	3/4’’ – 16	16	25	2xM6 10	1 ½’’ – 16 28	1.1
	50		31	CMI5W50	130												1.3
	75		46	CMI5W75	155												1.5
	100		61.7	CMI5W100	180												1.7
	125		77	CMI5W125	205												1.9
	150		92.4	CMI5W150	230												2.1
10 97	25	13.9	34.7	CMI10W25	97	57	42	35	19	34	7	1’’ – 8	19	39	2xM8 12	2 ¼’’ – 14 28	2.2
	50		69.3	CMI10W50	122												2.7
	75		104	CMI10W75	147												3.2
	100		139	CMI10W100	172												3.7
	125		173.2	CMI10W125	197												4.2
	150		208	CMI10W150	222												4.7
15 149	25	21.2	53	CMI15W25	107	69	52	42	19	40	8	1’’ – 8	25	47	2xM8 12	2 ¾’’ – 16 30	3.3
	50		106.2	CMI15W50	132												3.8
	75		159.3	CMI15W75	157												4.6
	100		212.4	CMI15W100	182												5
	125		265.5	CMI15W125	207												5.5
	150		318.6	CMI15W150	232												6
	175		371.7	CMI15W175	257												6.5
	200		424.8	CMI15W200	282												7
25 232	25	33.4	83	CMI25W25	122	84	65	55	19	53	9	1 ½’’ – 16	25	58	2xM10 14	3 5/16’’ – 12 49	4.7
	50		166	CMI25W50	147												5.4
	100		332	CMI25W100	197												7.5
	150		498	CMI25W150	247												8.8
	200		664	CMI25W200	297												10.1
	250		830	CMI25W250	347												11.5
	300		996	CMI25W300	397												12.9
50 496	50	70.9	354	CMI50W50	164	127	95	80	25	65	4	M16	12	95	2xM12 18	5’’ – 12 55	14.2
	100		709	CMI50W100	214												17.4
	150		1063	CMI50W150	264												20.8
	325		2304	CMI50W325	439												32.6
100 929	100	132.7	1327	CMI100W100	246	175	130	100	26	85	4	M16	17	140	2xM12 18	6’’ – 12 65	39.6
100 929	150	132.7	1991	CMI100W150	296	175	130	100	26	85	4	M16	17	140	2xM12 18	6’’ – 12 65	46

font-size: x-small

Accessories ZTT tilt saddle

MODEL	FOR USE WITH	a mm	b mm	c mm	j mm	u mm	z mm	w mm	kg
ZTT10	CMI10N25	16	1	–	34	–	5.5	24	0.1
ZTT11	CMI10N # # #	9	21	12	34	M24x2	–	–	0.1
ZTT11W	CMI10W # # #	9	21	12	34	1’’ – 8	–	–	0.1
ZTT31	CMI25N # # #	16	30	14	53	M32x2	–	–	0.3
ZTT31	CMI30N210	16	30	14	53	M32x2	–	–	0.3
ZTT31W	CMI25W # # #	16	30	14	53	1 ½’’ – 16	–	–	0.3
ZTT51	CMI50 # # # #	18	26	8	68	65	5.5	45	0.8
ZTT101	CMI100 # # # #	22	32	10	88	85	6.5	65	1.6

Accessories ZAB base plates

MODEL	FOR USE WITH	a mm	b mm	c mm	d mm	z mm	w mm	kg
ZAB5	CMI5N### CMI5W###	35	215	40	5	7	25	6,4
ZAB10	CMI10N # # # CMI10W###	35	235	60	5	9	39	7,9
ZAB25	CMI25N### CMI25W###	35	255	85	5	11	58	9,5

Accessories ZAE#M plunger clevis eyes

MODEL	FOR USE WITH	A mm	B mm	C mm	D mm	E mm	F mm	G mm	H mm	kg
ZAE5M	CMI5N # # #	Ø28	55	14	Ø16	16	19	10	M16 x2	0.15
ZAE10M	CMI10N # # #	Ø42	73	25	Ø22	25	28	12	M24 x2	0.45
ZAE25M	CMI25N # # #	Ø57	85.5	38	Ø31	31	35	14.5	M32 x2	1
ZAE5MW	CMI5W # # #	Ø28	55	14	Ø16	16	19	10	3/4’’ – 16	0.15
ZAE10MW	CMI10W # # #	Ø42	73	25	Ø22	25	28	12	1’’ – 8	0.45
ZAE25MW	CMI25W # # #	Ø57	85.5	38	Ø31	31	35	14.5	1 ½’’ – 16	1

Accessories ZAR base clevis eyes

MODELLO

Adatto a cilindri

A

mm

B

mm

C

mm

D

mm

E

mm

F

mm

G

mm

H

mm

I

mm

L

mm

kg

ZAR5

CMI5N###

Ø45

47

14

Ø16

16

25

Ø7

Ø25

Ø40

4

0.2

ZAR10

CMI10N###

Ø65

66

25

Ø22

25

35

Ø8,5

Ø39

Ø60

4

0.6

ZAR25

CMI25N###

Ø95

79

38

Ø31

31

41

Ø13

Ø58

Ø85

3

1.3

ZAR5W

CMI5W###

Ø45

47

14

Ø16

16

25

Ø7

Ø25

Ø38

4

0.2

ZAR10W

CMI10W###

Ø65

66

25

Ø22

25

35

Ø8,5

Ø39

Ø57

4

0.6

ZAR25W

CMI25W###

Ø95

79

38

Ø31

31

41

Ø13

Ø58

Ø84

3

1.3

Hydraulic cylinders

Hydraulic pumps

Valves & accessories

Hydraulic tools

Tightening

EPP special applications

Selection chart

Accessories ZTT tilt saddle

Accessories ZAB base plates

Accessories ZAE#M plunger clevis eyes

Accessories ZAR base clevis eyes

CMT#L

CMT#N

CMP

CML

CMI#W

CMI#N

CMF#NJ

CMF#L

CMF#N

CMC

The Company

Products

Terms and Conditions