QUICK COUPLERS 700 bar
Max working pressure: 700 bar
Thread: 1/4″ – 3/8″ NPT
Features
Quick release coupers are available in screw and flat face versions and are compatible with all the EUROPRESS product range and also interchangeable with most couplings used on high pressure hydraulic equipment.
Flat face snap couplers are recommended because:
– Anti-drip with negligible air or fluid inclusion during coupling and uncoupling operations ;
– Easy to clean ;
– Rotary motion which prevents hose twisting ;
– Safe coupling system (two voluntary movemens are necessary for uncoupling).
It’s important to drop the pressure inside the cylinder before disconnecting the quick coupler to avoid problems if re-inserting or lowering the load. In case some pressure persists it is possible to use the apposite tool KTS38.
Couplers with Viton seals are available on request.
When using screw couplings, the nut of the female part must always be fully tightened on the male part. If the two parts are not fully connected the oil can not pass through the coupler, and damage or injury can occur.
Selection chart for quick couplers 700 bar
| Max working pressure | Coupling type | Thread type | Coupler type | Model | Dimension | Weight | ||
| bar | D | A | B | C | g | |||
| 700 | Screw | 1/4″ NPT |
Complete (K71M+K71F+K71C+K71D) |
K71 | – | – | – | – |
|
Male with female thread |
K71M | 39 | 30 | 19 | 75 | |||
|
Female with male thread |
K71F | 60,5 | 30 | 22 | 140 | |||
| Female with female thread | K71X | 58 | 30 | 22 | 150 | |||
| Caps for female | K71C | – | – | – | – | |||
| Caps for male | K71D | – | – | – | – | |||
| 3/8″ NPT |
Complete (K73M+K73F+K73C+K73D) |
K73 | – | – | – | – | ||
| Male with female thread | K73M | 40,5 | 36 | 32 | 120 | |||
| Female with male thread | K73F | 72 | 35,5 | 24 | 200 | |||
| Female with female thread | K73X | 76 | 35,5 | 24 | 210 | |||
| Caps for female | K73C | – | – | – | – | |||
| Caps for male | K73D | – | – | – | – | |||
| Flat face | 1/4″ NPT |
Complete (KP71M+KP71X) |
KP71 | – | – | – | – | |
| Male with female thread | KP71M | 48 | 24 | 22 | 90 | |||
| Female with female thread | KP71X | 58 | 29 | 22 | 210 | |||
| 3/8″ NPT | Complete (KP73M+KP73X) | KP73 | – | – | – | – | ||
| Male with female thread | KP73M | 55 | 26 | 24 | 100 | |||
| Female with female thread | KP73X | 60 | 29 | 24 | 220 | |||
Selection chart for quick couplers 1000 - 1500 - 2000 bar
Also these couplings are compatible with the whole EUROPRESS product range and high pressure accessories.
They are available with the quick release coupling version to ensure easy and fast coupling and have a dust protection cap.
|
WORKING PRESSURE |
COUPLING TYPE |
TRHEAD TYPE |
COUPLER TYPE |
MODEL |
DIMENSION mm |
WEIGHT |
||
|
bar |
|
D |
|
A |
B |
C |
g |
|
|
1000 |
Quick release |
1/4” NPT |
Complete (K11M+K11X) |
K11 |
– |
– |
– |
– |
|
Male with female thread |
K11M |
36 |
25 |
22 |
60 |
|||
|
Female with female thread |
K11X |
58,5 |
27,5 |
24 |
150 |
|||
|
3/8” NPT |
Complete (K13M+K13X) |
K13 |
– |
– |
– |
– |
||
|
Male with female thread |
K13M |
37 |
27 |
24 |
70 |
|||
|
Female with female thread |
K13X |
60,5 |
27,5 |
24 |
175 |
|||
|
1500 |
1/4” BSP |
Complete (K15M+K15X) |
K15 |
– |
– |
– |
– |
|
|
Male with female thread |
K15M |
37 |
25 |
22 |
65 |
|||
|
Female with female thread |
K15X |
58,5 |
27,5 |
24 |
150 |
|||
|
2000 |
Complete (K20M+K20X) |
K20 |
– |
– |
– |
– |
||
|
Male with female thread |
K20M |
38 |
25 |
22 |
65 |
|||
|
Female with female thread |
K20X |
67 |
30 |
24 |
210 |
|||
Check associated products
