UHM

HYDRAULIC THREADED NUT

Force: 183 – 1583 kN

Through hole: M50 – Tr500

Max working pressure: 300- 600 bar

Features

The UHM Hydraulic Nuts are used for mounting and dismounting bearings on tapered seating, directly or through conical adapter or withdrawal sleeve. Their design is aimed at reducing the operation time and make it easier. Built to withstand pressure up to 800 bar, the hydraulic nuts are able to supply all the force necessary also for the most difficult cases. The hydraulic nuts are supplied with a K11M coupler at one port, while the other ports are plugged. The pumps dedicated to operate the hydraulic nuts are fitted with the fittings necessary for an optimal connection.

– Wide dimensional range from 50 mm to 500 mm as standard.
– Available in UHI version with Imperial thread from 1,967” to 19,682”.
– The coupling can be fitted to any of the ports available according to the space constraints.
– The installation of the nut on the thread is facilitated by the holes provided for the insertion of tommy bars
– The models over 30 kg of weight are provided with threaded holes for eyebolts.
– Particular or larger models are available on request.

Selection chart

PUSHING FORCE	WORKING PRESSURE	PUSHING AREA	STROKE	OIL VOLUME	MODEL	CLOSED HEIGHT	Ø EXTERNAL	Ø EXTERNAL PISTON	Ø INTERNAL PISTON	PISTON PROJECTION	THREAD	WEIGHT
kN	bar	cm²	mm	cm³		ALL DIMENSIONS (mm)						kg
kN	bar	cm²	mm	cm³		A	D	D1	D2	K	Y	kg
183	600	30	4	12	UHM50	40	110	98	51	2	M 50×1,5	2,6
188	600	31	4	13	UHM55	40	118	105	56	2	M 55×2	2,7
190	600	32	4	13	UHM60	40	125	112	61	2	M 60×2	2,8
213	600	35	4	14	UHM65	40	132	118	66	3	M 65×2	3,1
245	600	41	4	16	UHM70	40	140	123	71	3	M 70×2	3,3
274	600	46	4	18	UHM75	40	145	128	76	3	M 75×2	3,5
299	600	50	4	20	UHM80	40	150	133	81	3	M 80×2	3,7
301	600	50	4	20	UHM85	40	155	138	86	3	M 85×2	3,8
302	600	50	5	25	UHM90	40	160	143	91	3	M 90×2	4,1
314	600	52	5	26	UHM95	40	165	148	96	3	M 95×2	4,3

Selection chart

PUSHING FORCE	WORKING PRESSURE	PUSHING AREA	STROKE	OIL VOLUME	MODEL	CLOSED HEIGHT	Ø EXTERNAL	Ø EXTERNAL PISTON	Ø INTERNAL PISTON	PISTON PROJECTION	THREAD	WEIGHT
kN	bar	cm²	mm	cm³		ALL DIMENSIONS (mm)						kg
kN	bar	cm²	mm	cm³		A	D	D1	D2	K	Y	kg
327	600	54	5	27	UHM100	40	170	155	101	3	M 100×2	4,5
340	600	57	5	28	UHM105	42	175	160	106	6	M 105×2	4,7
352	600	59	5	29	UHM110	42	180	165	111	6	M 110×2	5
365	600	61	5	30	UHM115	43	185	170	116	6	M 115×2	5,2
378	600	63	5	31	UHM120	43	190	175	121	6	M 120×2	5,4
391	600	65	5	33	UHM125	44	195	180	126	7	M 125×2	5,6
390	600	65	5	32	UHM130	44	200	185	131	7	M 130×2	5,8
399	600	67	5	33	UHM135	45	205	190	136	7	M 135×2	6
412	600	69	5	34	UHM140	45	210	196	141	7	M 140×2	6,2
424	600	71	5	35	UHM145	46	215	202	146	7	M 145×2	6,5
436	600	73	5	36	UHM150	46	220	207	151	7	M 150×2	6,7
486	600	81	5	40	UHM155	46	225	214	156	7	M 155×3	7
512	600	85	6	51	UHM160	47	235	220	161	7	M 160×3	7,7
560	600	93	6	56	UHM165	47	240	225	166	7	M 165×3	8,2
580	600	97	6	58	UHM170	48	245	232	171	7	M 170×3	8,6
608	600	101	6	61	UHM180	48	255	243	181	7	M 180×3	9,1
691	600	115	8	92	UHM190	50	270	255	191	8	M 190×3	10,5
759	600	127	8	101	UHM200	50	280	267	201	8	M 200×3	11,5
528	400	132	8	106	UHM205	51	290	272	207	8	Tr 205×4	12,3
538	400	135	9	121	UHM210	52	295	278	212	9	Tr 210×4	12,7
549	400	137	9	124	UHM215	53	300	283	217	9	Tr 215×4	13,2
577	400	144	9	130	UHM220	53	305	288	222	9	Tr 220×4	13,5
611	400	153	10	153	UHM225	54	315	296	227	9	Tr 225×4	15
643	400	161	10	161	UHM230	54	320	302	232	9	Tr 230×4	15,3
650	400	162	10	162	UHM235	54	325	307	237	9	Tr 235×4	15,5
659	400	165	10	165	UHM240	55	330	312	242	9	Tr 240×4	16,1
724	400	181	10	181	UHM250	56	345	325	252	10	Tr 250×4	18
749	400	187	11	206	UHM260	57	355	337	262	10	Tr 260×4	19
785	400	196	12	236	UHM270	58	370	348	272	10	Tr 270×4	21,1
817	400	204	12	245	UHM275	58	375	337	277	10	Tr 275×4	21,5
849	400	212	12	255	UHM280	59	380	342	282	10	Tr 280×4	22,3
875	400	219	13	284	UHM290	60	390	352	292	10	Tr 290×4	23,3
921	400	230	13	299	UHM295	60	400	362	297	10	Tr 295×4	25

Selection chart

PUSHING FORCE	WORKING PRESSURE	PUSHING AREA	STROKE	OIL VOLUME	MODEL	CLOSED HEIGHT	Ø EXTERNAL	Ø EXTERNAL PISTON	Ø INTERNAL PISTON	PISTON PROJECTION	THREAD	WEIGHT
kN	bar	cm²	mm	cm³		ALL DIMENSIONS (mm)						kg
kN	bar	cm²	mm	cm³		A	D	D1	D2	K	Y	kg
955	400	239	13	310	UHM300	61	405	365	302	10	Tr 300×4	25,8
753	300	251	13	326	UHM310	62	415	375	312	10	Tr 310×5	27
763	300	254	13	331	UHM315	62	420	385	317	10	Tr 315×5	27,5
796	300	265	14	372	UHM320	63	430	405	322	10	Tr 320×5	29,9
811	300	270	14	379	UHM330	64	440	415	332	11	Tr 330×5	31
822	300	274	14	383	UHM335	64	445	420	337	11	Tr 335×5	32
850	300	283	14	397	UHM340	65	450	425	342	11	Tr 340×5	32,5
861	300	287	14	402	UHM345	65	455	430	347	11	Tr 345×5	33,5
918	300	306	14	429	UHM350	66	465	438	352	11	Tr 350×5	35
911	300	304	15	456	UHM355	67	470	445	357	11	Tr 355×5	36,5
941	300	314	15	470	UHM360	67	475	450	362	11	Tr 360×5	37
950	300	317	15	475	UHM365	67	482	455	367	11	Tr 365×5	38
964	300	321	16	514	UHM370	68	490	460	372	11	Tr 370×5	40
994	300	331	16	530	UHM375	68	495	465	377	11	Tr 375×5	41
1006	300	335	16	536	UHM380	69	500	472	382	11	Tr 380×5	41,5
1037	300	346	16	553	UHM385	69	505	478	387	11	Tr 385×5	42
1075	300	358	16	574	UHM395	69	512	488	397	11	Tr 395×5	43
1104	300	368	17	626	UHM400	71	525	495	402	11	Tr 400×5	47
1149	300	383	17	651	UHM410	71	535	505	412	11	Tr 410×5	48
1162	300	387	17	658	UHM415	71	540	510	417	11	Tr 415×5	49
1174	300	391	17	665	UHM420	72	545	517	422	12	Tr 420×5	50
1198	300	399	17	679	UHM430	74	555	527	432	12	Tr 430×5	52
1211	300	404	17	686	UHM435	74	560	533	437	12	Tr 435×5	53
1289	300	430	17	731	UHM440	74	565	538	442	12	Tr 440×5	54
1315	300	438	17	745	UHM450	76	580	548	452	12	Tr 450×5	58
1341	300	447	18	805	UHM460	76	590	560	462	12	Tr 460×5	59,5
1367	300	456	18	820	UHM470	76	600	570	472	12	Tr 470×5	61
1393	300	464	18	836	UHM480	76	612	582	482	12	Tr 480×5	63
1555	300	518	19	985	UHM490	80	625	593	492	13	Tr 490×5	69
1583	300	528	20	1056	UHM500	80	635	605	502	13	Tr 500×5	70

applications

All EUROPRESS products are covered by a one year guarantee against any defects in materials or workmanship. This guarantee does not cover normal wear and tear, improper use or any applications not in compliance with our recommended instructions, or where the equipment is used with unsuitable fluids, modifications and/ or alterations (including those resulting from repair or attempted repair by persons not authorized by EURO PRESS PACK), or damage caused by transportation.

To report any flaw, defect, non conformity, and/or to claim action under this guarantee, the Customer shall inform EURO PRESS PACK in writing within 5 days after receipt of the goods, or in case of hidden defect, within 5 days after such defect has been discovered. Before returning the goods to EURO PRESS PACK for possible remedy under guarantee, the purchaser shall have received EURO PRESS PACK’s authorization . If EURO PRESS PACK is firmly convinced that its own product is defective, EURO PRESS PACK will provide free of charge for repair or replacement. The transport costs to and from EURO PRESS PACK are at the customer’s charge.

If the intervention of EURO PRESS PACK personnel or of our authorized distributors is requested on the site for installation of the replaced items (provided it is ascertained that they are covered by this guarantee) the costs of transfer of such personnel, their travelling hours and travel expenses are at the Customer’s charge, whereas only the actual working hours will be at the charge of EURO PRESS PACK or of its authorized distributor.

THE ABOVE GUARANTEE IS THE ONLY GUARANTEE ACKNOWLEDGED AND RECOGNIZED BY EURO PRESS PACK AND IT REPLACES ANY AND ALL OTHER EXPLICIT OR IMPLICIT GUARANTEES REGARDINGTHEPRODUCTSMANUFACTURED AND MARKETED BY EURO PRESS PACK, AS TO THEIR MARKETABILITY OR SUITABILITY FOR SPECIFIC APPLICATIONS.

IT IS HEREBY EXPRESSLY STATED THAT ANY CHARGES AND/OR LIABILITY OF EURO PRESS PACK ARE EXCLUDED REGARDING:

ANY ACCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY DEFECTIVE OR NON CONFORMING PRODUCTS, BY NEGLIGENCE OR OTHERWISE;
DAMAGE DUE TO OTHER CAUSES INCLUDING, BUT NOT LIMITED TO NEGLIGENCE OF EURO PRESS PACK;
ANY OTHER OBLIGATION OR LIABILITY DERIVING FROM BREACH OF CONTRACT OR OF GUARANTEE.

THIS GUARANTEE WILL NOT BE EFFECTIVE IN CASE OF EVEN PARTIAL DEFAULT IN PAYMENT FOR THE SUPPLIED GOODS, INCLUDING INVOICES FOR TECHNICAL ASSISTANCE SERVICES.

The maximum amount payable by EURO PRESS PACK for damages will at all events be limited to the actually paid purchase price and shall therefore never exceed this price.

I In case of goods lost during transport, please contact the company within 30 days of loss: sales@europresspack.it

QUALITY CERTIFICATION
Euro Press Pack has always been a Company very attentive to quality norms. This means that both the design of our products than their manufacturing are planned considering the Good Manufacturing Practice.All necessary controls are made to grant our customers the highest possible quality standard. In this way the final product is produced and checked according to the defined procedures and this assures that the quality system is efficient, controlled and proved.

QUALITY SYSTEM CERTIFICATE ISO 9001
Certification for design, manufacturing, marketing and repair of high pressure components.

ENVIRONMETAL SYSTEM CERTIFICATE ISO 14001
System certification for design and manufacture, through the various step of cutting, mechanical machining, surface treatments, painting, assembly, testing, packing and dispatch, sales and service of high pressure hydraulic fluid components.

ANSI B30.1
All cylinders comply to the standard laid down by the American National Standards institute (apart from CGS#P#, CGG#P#, and CGR cylinders).

EN 60204-1
The electric parts of the machines are made according the standard of EN 60204-1.

SAE 100R10
The 700 bar hoses exceed this norm.

Direttive CE 2006/42/CE – CE 2006/95/CE – CE 2004/108/CE
All our power packs conform the CE norm on the machine directive, low tension and electromagnetic compatibility.

CE mark.
All EUROPRESS products meet the European safety directives. Except certain systems or utensils which are designed for a specific use and are certified as machineries, all the cylinders, pumps and power packs of generic purpose are accompanied by certificates. The CE certification is responsibility of the construction of the machinery in which all the components are assembled.

READY DELIVERY

Thanks to our speedy deliveries you don’t have the urge to place a huge stock order to assure your customers a good service

UHM

HYDRAULIC THREADED NUT

Features

applications

Energy

Industry

Maintenances

READY DELIVERY