force: 10-20t
stroke: 8-50mm
max working pressure: 700bar
INTRODUCTION AND OPERATIONAL AREAS
The Europress system model CMF22N8S##NJ is used to verify and test the studs in New Jersey barriers and guard rails. The barriers both New Jersey, steel or concrete, and the guard rails are fixed to the road thanks to studs which generally have M16, M20 or M24 dimensions. Both during the installation and the exercise of the studs it’s necessary to verify them through traction tests in order to prove their adherence to concrete and the integrity of the material. To this purpose the Europress system allows to fulfill simple and efficient tensile strength tests. The system is composed of a traction load cell CMF22N8G constituted by a simple effect spring return hollow ram cylinder, with a nominal capacity of a maximum of 212 kN at 700 bars, 8 mm of stroke, firmly connected to a gauge and provided with a quick female coupler combined with a pump which generates hydraulic pressure. This traction cell constitutes an instrument to measure the force applied on the stud while testing. If calibrated as a measurement instrument it can be used also to redact calibration certificated tests. Depending on the different applications required the set can be equipped with ancillaries which are useful to the traction of studs of M16, M20, M24 diameter. Moreover it can be used a longer M20 diameter version for the traction of studs fixed on steel New Jersey barriers. The cylinder is activated by a PNP130 (or PN131) hand pump and a flexible hose SN20M with a male coupler on top.The pump is connected thanks to the male coupler fixed on one side of the hose which is connected to the female coupler fixed on the cylinder. The hollow ram cylinder, thanks to its through hole, allows the passage of the tie-rod of appropriate dimension in order to screw it on the stud itself. Extending the piston of the cylinder, a tensile force, proportional to the pressure generated by the pump, is exerted on the stud. The gauge allows at last to verify and control the force exerted on the stud.
SET CHOICE
The load cell CMF22N8G is suitable for all the sets and it’s adjustable to certify the extent of the applied force. The set CMF22N8S1624NJC, which is available in our stock, includes all the necessary articles to compose the illustrated variants, in particular:
– 1 pcs. Load cell CMF22N8G ;
– 1 pcs. Base 320220820 ;
– 1 pcs. Extended base 320200821 for barriers type New Jersey in steel ;
– 3 pcs. Screws 3001108025 ;
– 1 pcs. Knub 320220700 ;
– 1 pcs. Puller M16 320220716 ;
– 1 pcs. Puller M20 320220720 ;
– 1 pcs. Puller M20 long 320220721 for extended base ;
– 1 pcs. Puller M24 320220724.
INTRODUCTION AND OPERATIONAL AREAS
The Europress system model CMF22N50S##NJ is used to verify and test the studs in New Jersey barriers and guard rails. The barriers both New Jersey, steel or concrete, and the guard rails are fixed to the road thanks to studs which generally have M16, M20, M24, M27 and M30 dimensions. Both during the installation and the exercise of the studs it’s necessary to verify them through traction tests in order to prove their adherence to concrete and the integrity of the material. To this purpose the Europress system allows to fulfill simple and efficient tensile strength tests. The system is composed of a traction load cell CMF22N50 constituted by a simple effect spring return hollow ram cylinder, with a nominal capacity of a maximum of 230 kN at 700 bars, 50 mm of stroke, firmly connected to a gauge and provided with a quick female coupler combined with a pump which generates hydraulic pressure. This traction cell constitutes an instrument to measure the force applied on the stud while testing. If calibrated as a measurement instrument it can be used also to redact calibration certificated tests. Depending on the different applications required the set can be equipped with ancillaries which are useful to the traction of studs of M16, M20, M24, M27 and M30 diameter. Moreover it can be used a longer M20 diameter version for the traction of studs fixed on steel New Jersey barriers.The cylinder is activated by a PNP130G (or PN131G) hand pump and a flexible hose SN20M with a male coupler on top. The pump is connected thanks to the male coupler fixed on one side of the hose which is connected to the female coupler fixed on the cylinder. The hollow ram cylinder, thanks to its through hole, allows the passage of the tie-rod of appropriate dimension in order to screw it on the stud itself. Extending the piston of the cylinder, a tensile force, proportional to the pressure generated by the pump, is exerted on the stud. The gauge allows at last to verify and control the force exerted on the stud.
HOW TO CHOOSE A SET
The CMF20N50 cylinder is suitable for every set. All the sets can be supplied as single sets or it’s also available a set which includes them all, it’s the CMF20N50S1630NJC, more specifically:
– 1 pz. Cylinder CMF20N50;
– 1 pz. 320200820 hollow spacer for open M16 ed M20 New Jersey barriers *;
– 1 pz. 320200821 extended spacer for enclosed M20 New Jersey barriers**;
– 1 pz. 320200824 extended spacer for Guard-Rails M20**, M24, M27 ed M30***;
– 2 pz. Screw 3001108025;
– 1 pz. Screw 3001108180;
– 1 pz. Rod M16 320200716*;
– 1 pz. Rod M20 320200720*;
– 1 pz. M20 320200721 extension for estended base**;
– 1 pz. Adaptor M20 320200720E**;
– 1 pz. Adaptor M24 320200724***;
– 1 pz. Adaptor M27 320200727***;
– 1 pz. Adaptor M30 3202007230***;
The components of the set are illustrated in the drawing underneath.
* Allows the total extraction of the M16 with the nut, tests with M20 on 10 mm with nut or total extraction without the nut. Maximum applicable force 110 kN.
**Maximum applicable force with M20 110kN rod *** Maximum applicable force with M24, M27 ed M30 80kN rod
|
MODEL |
A |
B |
C (puller code) |
D (base code) |
kg |
|
CMF20N50S16NJ* |
M16 |
20 |
320200716 |
320200820 |
9,5 |
|
CMF20N50S20NJ* |
M20 |
20 |
320200720 |
320200820 |
9,5 |
|
CMF20N50S20NJL** |
M20 |
20 |
320200720 + 320200721 |
320200821 |
10,8 |
|
CMF20N50S20NJ** |
M20 |
25 |
320200720 + 320200720E |
320200824 |
11 |
|
CMF20N50S24NJ*** |
M24 |
25 |
320200720 + 320200724 |
320200824 |
11 |
|
CMF20N50S27NJ*** |
M27 |
25 |
320200720 + 320200727 |
320200824 |
11 |
|
CMF20N50S30NJ*** |
M30 |
25 |
320200720 + 320200730 |
320200824 |
11 |
|
CMF20N50S1630NJC |
M16 / M20 / M24 / M27 / M30 |
20 / 25 |
– |
– |
– |
|
MODEL |
A |
B |
C (puller code) |
D (base code) |
kg |
|
CMF20N50S16NJ* |
M16 |
20 |
320200716 |
320200820 |
9,5 |
|
CMF20N50S20NJ* |
M20 |
20 |
320200720 |
320200820 |
9,5 |
|
CMF20N50S20NJL** |
M20 |
20 |
320200720 + 320200721 |
320200821 |
10,8 |
|
CMF20N50S20NJ** |
M20 |
25 |
320200720 + 320200720E |
320200824 |
11 |
|
CMF20N50S24NJ*** |
M24 |
25 |
320200720 + 320200724 |
320200824 |
11 |
|
CMF20N50S27NJ*** |
M27 |
25 |
320200720 + 320200727 |
320200824 |
11 |
|
CMF20N50S30NJ*** |
M30 |
25 |
320200720 + 320200730 |
320200824 |
11 |
|
CMF20N50S1630NJC |
M16 / M20 / M24 / M27 / M30 |
20 / 25 |
– |
– |
– |
All EUROPRESS products are covered by a one year guarantee against any defects in materials or workmanship. This guarantee does not cover normal wear and tear, improper use or any applications not in compliance with our recommended instructions, or where the equipment is used with unsuitable fluids, modifications and/ or alterations (including those resulting from repair or attempted repair by persons not authorized by EURO PRESS PACK), or damage caused by transportation.
To report any flaw, defect, non conformity, and/or to claim action under this guarantee, the Customer shall inform EURO PRESS PACK in writing within 5 days after receipt of the goods, or in case of hidden defect, within 5 days after such defect has been discovered. Before returning the goods to EURO PRESS PACK for possible remedy under guarantee, the purchaser shall have received EURO PRESS PACK’s authorization . If EURO PRESS PACK is firmly convinced that its own product is defective, EURO PRESS PACK will provide free of charge for repair or replacement. The transport costs to and from EURO PRESS PACK are at the customer’s charge.
If the intervention of EURO PRESS PACK personnel or of our authorized distributors is requested on the site for installation of the replaced items (provided it is ascertained that they are covered by this guarantee) the costs of transfer of such personnel, their travelling hours and travel expenses are at the Customer’s charge, whereas only the actual working hours will be at the charge of EURO PRESS PACK or of its authorized distributor.
THE ABOVE GUARANTEE IS THE ONLY GUARANTEE ACKNOWLEDGED AND RECOGNIZED BY EURO PRESS PACK AND IT REPLACES ANY AND ALL OTHER EXPLICIT OR IMPLICIT GUARANTEES REGARDINGTHEPRODUCTSMANUFACTURED AND MARKETED BY EURO PRESS PACK, AS TO THEIR MARKETABILITY OR SUITABILITY FOR SPECIFIC APPLICATIONS.
IT IS HEREBY EXPRESSLY STATED THAT ANY CHARGES AND/OR LIABILITY OF EURO PRESS PACK ARE EXCLUDED REGARDING:
THIS GUARANTEE WILL NOT BE EFFECTIVE IN CASE OF EVEN PARTIAL DEFAULT IN PAYMENT FOR THE SUPPLIED GOODS, INCLUDING INVOICES FOR TECHNICAL ASSISTANCE SERVICES.
The maximum amount payable by EURO PRESS PACK for damages will at all events be limited to the actually paid purchase price and shall therefore never exceed this price.
I In case of goods lost during transport, please contact the company within 30 days of loss: sales@europresspack.it
QUALITY CERTIFICATION
Euro Press Pack has always been a Company very attentive to quality norms. This means that both the design of our products than their manufacturing are planned considering the Good Manufacturing Practice.All necessary controls are made to grant our customers the highest possible quality standard. In this way the final product is produced and checked according to the defined procedures and this assures that the quality system is efficient, controlled and proved.
QUALITY SYSTEM CERTIFICATE ISO 9001
Certification for design, manufacturing, marketing and repair of high pressure components.
ENVIRONMETAL SYSTEM CERTIFICATE ISO 14001
System certification for design and manufacture, through the various step of cutting, mechanical machining, surface treatments, painting, assembly, testing, packing and dispatch, sales and service of high pressure hydraulic fluid components.
ANSI B30.1
All cylinders comply to the standard laid down by the American National Standards institute (apart from CGS#P#, CGG#P#, and CGR cylinders).
EN 60204-1
The electric parts of the machines are made according the standard of EN 60204-1.
SAE 100R10
The 700 bar hoses exceed this norm.
Direttive CE 2006/42/CE – CE 2006/95/CE – CE 2004/108/CE
All our power packs conform the CE norm on the machine directive, low tension and electromagnetic compatibility.
CE mark.
All EUROPRESS products meet the European safety directives. Except certain systems or utensils which are designed for a specific use and are certified as machineries, all the cylinders, pumps and power packs of generic purpose are accompanied by certificates. The CE certification is responsibility of the construction of the machinery in which all the components are assembled.
Thanks to our speedy deliveries you don’t have the urge to place a huge stock order to assure your customers a good service
