CGS#N

CYLINDERS, LOAD RETURN STANDARD – FOR HIGH TONNAGE

force: 5-500t

stroke: 15-300mm

max working pressure: 700bar

Features

CGS cylinders also have concentric grooves machined into the end of the rod to improve load grip, models above 30 tonne have lifting eyelets to facilitate their transport. From 50 ton upwards, the cylinders are plunging type (P version) and have a system which prevents any possible over-stroke. The rod has a coloured zone which becomes visible 10 mm before the end of the piston stroke.
All models can operate with off-centred load up to 8% of their nominal capacity.

OPERATIONAL AREAS
These hydraulic cylinders are extremely solid and are recommended for the lifting, lowering and sustaining of a heavy load.
They are carried out specifically strong in order to be usefull in applications which require very heavy loads to be lifted.
The anti-corrosion treatment applied to these cylinders makes them suitable for use in harsh and adverse environments.

OPTIONS
– T version, cylinder with integrated tilt saddle.
– F version, cylinder with base mounting holes for fixing purposes.
– N version, (optional starting from 50 t) cylinders with end of stroke ring nut.
This version is in compliance with ANSI B30.1.

ACCESSORIES
ZTT tilt saddle reduces the effects of any possible off-centred load.

♦ Whenever P version cylinders are being used the operator must always be in a position to observe when the coloured end of stroke section of the rod appears.

♦ It’s important to drop the pressure inside the cylinder before disconnecting the quick coupler to avoid problems if re-inserting or lowering the load. In case some pressure persists it is possible to use the apposite tool KTS38 in order to lower the pressure in the couplers.

Selection chart

PUSHING FORCE	STROKE	EFFECTIVE AREA	OIL VOLUME	MODELLO	CLOSED HEIGHT	CLOSED HEIGHT WITH INTEGRATED TILT SADDLE	Ø EXTERNAL	Ø PISTON	Ø ROD VERSION P	Ø ROD VERSION N	COUPLER HEIGHT	Ø INTEGRATED TILT SADDLE	ROD PROJECTION	ROD PROJECTION WITH INTEGRATED TILT SADDLE	Ø PCD MOUNTING HOLES	MOUNTING HOLES DEPTH	WEIGHT	* Nominal value, see kN for the exact force
t* kN	mm	cm²	cm3		A mm	A1 mm	D mm	E mm	F mm	F1 mm	H mm	J mm	K mm	K1 mm	U mm	V / Z mm	kg
5 49,5	15	7.1	11	CGS5N15	45	–	60/45	30	–	24	19	–	1	–	30	2xM5 10	1
	50		35	CGS5N50	80												1.6
	80		56	CGS5N80	120												2.4
10 111	25	15.9	40	CGS10N25	72	75	75	45	–	35	19	34	1	4	25	2xM8 8	2.8
	50		80	CGS10N50	97	100											3.6
20 198	25	28.3	71	CGS20N25	75	80	88	60	–	45	19	43	1	6	60	2xM10 10	3.7
	50		141	CGS20N50	100	105											4.7
	100		283	CGS20N100	150	155											6.6
30 309	25	44.1	110	CGS30N25	86	90	102	75	–	55	19	53	1	5	65	2xM10 13	5.5
	50		221	CGS30N50	111	115											6.7
	100		442	CGS30N100	161	165											9.1
50 496	50	70.9	354	CGS50P50	122	127	127	95	95	80	22	68	1	6	95	2xM12 15	12
	100		709	CGS50P100	172	177											17
	150		1063	CGS50P150	222	227											22
100 929	50	132.7	664	CGS100P50	141	148	175	130	130	100	22	88	2	9	130	2xM12 17	27
	100		1327	CGS100P100	191	198											36
	150		1991	CGS100P150	241	248											46
150 1407	25	201	503	CGS150P25	137	146	213	160	160	120	30	118	3	12	130	4xM12 17	38
	50		1005	CGS150P50	162	171											45
	100		2011	CGS150P100	212	221											59
	150		3016	CGS150P150	262	271											73
	200		4021	CGS150P200	312	321											87
	250		5026	CGS150P250	362	371											101

Selection chart

PUSHING FORCE	STROKE	EFFECTIVE AREA	OIL VOLUME	MODEL	CLOSED HEIGHT	CLOSED HEIGHT WITH INTEGRATED TILT SADDLE	Ø EXTERNAL	Ø PISTON	Ø ROD VERSION P	Ø ROD VERSION N	COUPLER HEIGHT	ØINTEGRATED TILT SADDLE	ROD PROJECTION	ROD PROJECTION WIDTH INTEGRATED TILT SADDLE	Ø PCD MOUNTING HOLES	MOUNTING HOLES DEPTH	WEIGHT	* Nominal value, see kN for the exact force
t* kN	mm	cm²	cm3	MODEL	A mm	A1 mm	D mm	E mm	F mm	F1 mm	H mm	J mm	K mm	K1 mm	U mm	V / Z mm	kg
200 1984	25	283.4	709	CGS200P25	151	160	252	190	190	150	32	148	3	12	140	4xM16 20	59
	50		1418	CGS200P50	176	185											69
	100		2835	CGS200P100	226	235											88
	150		4253	CGS200P150	276	285											108
	200		5670	CGS200P200	326	335											127
	250		7088	CGS200P250	376	385											147
	300		8506	CGS200P300	426	435											167
250 2424	25	346.3	866	CGS250P25	167	176	280	210	210	170	34	158	3	12	150	4xM16 20	81
	50		1732	CGS250P50	192	201											93
	100		3464	CGS250P100	242	251											117
	150		5195	CGS250P150	292	301											141
	200		6927	CGS200P200	342	351											165
	250		8659	CGS250P250	392	401											189
	300		10391	CGS250P300	442	451											213
300 2908	25	415.4	1039	CGS300P25	173	182	305	230	230	190	38	158	3	12	170	4xM16 20	99
	50		2077	CGS300P50	198	207											113
	100		4155	CGS300P100	248	257											142
	150		6232	CGS300P150	298	307											171
	200		8310	CGS300P200	348	357											199
	250		10387	CGS300P250	398	407											228
	300		12464	CGS300P300	448	457											257

Selection chart

PUSHING FORCE	STROKE	EFFECTIVE AREA	OIL VOLUME	MODEL	CLOSED HEIGHT	CLOSED HEIGHT WITH INTEGRATED TILT SADDLE	Ø EXTERNAL	Ø PISTON	Ø ROD VERSION P	Ø ROD VERSION N	COUPLER HEIGHT	Ø INTEGRATED TILT SADDLE	ROD PROJECTION	ROD PROJECTION WITH INTEGRATED TILT SADDLE	Ø PCD MOUNTING HOLES	MOUNTING HOLES DEPTH	WEIGHT	* Nominal value, see kN for the exact force
t* kN	mm	cm²	cm3	MODEL	A mm	A1 mm	D mm	E mm	F mm	F1 mm	H mm	J mm	K mm	K1 mm	U mm	V / Z mm	kg
350 3436	25	490.9	1227	CGS350P25	180	192	332	250	250	210	39	196	3	15	200	4xM16 20	122
	50		2454	CGS350P50	205	217											139
	100		4909	CGS350P100	255	267											173
	150		7363	CGS350P150	305	317											207
	200		9817	CGS300P200	355	367											241
	250		12272	CGS350P250	405	417											275
	300		14726	CGS350P300	455	467											309
400 4008	25	572.6	1431	CGS400P25	187	199	356	270	270	230	42	196	3	15	230	4xM16 20	146
	50		2863	CGS400P50	212	224											165
	100		5726	CGS400P100	262	274											204
	150		8588	CGS400P150	312	324											244
	200		11451	CGS400P200	362	374											283
	250		14314	CGS400P250	412	424											322
	300		17177	CGS400P300	462	474											361
500 4948	25	706.9	1767	CGS500P25	195	207	396	300	300	250	50	196	3	15	250	4xM16 20	188
	50		3534	CGS500P50	220	232											212
	100		7069	CGS500P100	270	282											261
	150		10603	CGS500P150	320	332											309
	200		14137	CGS500P200	370	382											357
	250		17651	CGS500P250	420	432											406
	300		21206	CGS500P300	470	482											454

applications

All EUROPRESS products are covered by a one year guarantee against any defects in materials or workmanship. This guarantee does not cover normal wear and tear, improper use or any applications not in compliance with our recommended instructions, or where the equipment is used with unsuitable fluids, modifications and/ or alterations (including those resulting from repair or attempted repair by persons not authorized by EURO PRESS PACK), or damage caused by transportation.

To report any flaw, defect, non conformity, and/or to claim action under this guarantee, the Customer shall inform EURO PRESS PACK in writing within 5 days after receipt of the goods, or in case of hidden defect, within 5 days after such defect has been discovered. Before returning the goods to EURO PRESS PACK for possible remedy under guarantee, the purchaser shall have received EURO PRESS PACK’s authorization . If EURO PRESS PACK is firmly convinced that its own product is defective, EURO PRESS PACK will provide free of charge for repair or replacement. The transport costs to and from EURO PRESS PACK are at the customer’s charge.

If the intervention of EURO PRESS PACK personnel or of our authorized distributors is requested on the site for installation of the replaced items (provided it is ascertained that they are covered by this guarantee) the costs of transfer of such personnel, their travelling hours and travel expenses are at the Customer’s charge, whereas only the actual working hours will be at the charge of EURO PRESS PACK or of its authorized distributor.

THE ABOVE GUARANTEE IS THE ONLY GUARANTEE ACKNOWLEDGED AND RECOGNIZED BY EURO PRESS PACK AND IT REPLACES ANY AND ALL OTHER EXPLICIT OR IMPLICIT GUARANTEES REGARDINGTHEPRODUCTSMANUFACTURED AND MARKETED BY EURO PRESS PACK, AS TO THEIR MARKETABILITY OR SUITABILITY FOR SPECIFIC APPLICATIONS.

IT IS HEREBY EXPRESSLY STATED THAT ANY CHARGES AND/OR LIABILITY OF EURO PRESS PACK ARE EXCLUDED REGARDING:

ANY ACCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY DEFECTIVE OR NON CONFORMING PRODUCTS, BY NEGLIGENCE OR OTHERWISE;
DAMAGE DUE TO OTHER CAUSES INCLUDING, BUT NOT LIMITED TO NEGLIGENCE OF EURO PRESS PACK;
ANY OTHER OBLIGATION OR LIABILITY DERIVING FROM BREACH OF CONTRACT OR OF GUARANTEE.

THIS GUARANTEE WILL NOT BE EFFECTIVE IN CASE OF EVEN PARTIAL DEFAULT IN PAYMENT FOR THE SUPPLIED GOODS, INCLUDING INVOICES FOR TECHNICAL ASSISTANCE SERVICES.

The maximum amount payable by EURO PRESS PACK for damages will at all events be limited to the actually paid purchase price and shall therefore never exceed this price.

I In case of goods lost during transport, please contact the company within 30 days of loss: sales@europresspack.it

QUALITY CERTIFICATION
Euro Press Pack has always been a Company very attentive to quality norms. This means that both the design of our products than their manufacturing are planned considering the Good Manufacturing Practice.All necessary controls are made to grant our customers the highest possible quality standard. In this way the final product is produced and checked according to the defined procedures and this assures that the quality system is efficient, controlled and proved.

QUALITY SYSTEM CERTIFICATE ISO 9001
Certification for design, manufacturing, marketing and repair of high pressure components.

ENVIRONMETAL SYSTEM CERTIFICATE ISO 14001
System certification for design and manufacture, through the various step of cutting, mechanical machining, surface treatments, painting, assembly, testing, packing and dispatch, sales and service of high pressure hydraulic fluid components.

ANSI B30.1
All cylinders comply to the standard laid down by the American National Standards institute (apart from CGS#P#, CGG#P#, and CGR cylinders).

EN 60204-1
The electric parts of the machines are made according the standard of EN 60204-1.

SAE 100R10
The 700 bar hoses exceed this norm.

Direttive CE 2006/42/CE – CE 2006/95/CE – CE 2004/108/CE
All our power packs conform the CE norm on the machine directive, low tension and electromagnetic compatibility.

CE mark.
All EUROPRESS products meet the European safety directives. Except certain systems or utensils which are designed for a specific use and are certified as machineries, all the cylinders, pumps and power packs of generic purpose are accompanied by certificates. The CE certification is responsibility of the construction of the machinery in which all the components are assembled.

READY DELIVERY

Thanks to our speedy deliveries you don’t have the urge to place a huge stock order to assure your customers a good service

CGS#N

CYLINDERS, LOAD RETURN STANDARD – FOR HIGH TONNAGE

Features

applications

constructions

Tunneling

Ship building

Maintenances

READY DELIVERY