CMP

LOW PROFILE CYLINDERS, WITH SHORT STROKE SPRING RETURN

force: 10-100t

stroke: 25-50mm

max working pressure: 700bar

Features

Their main feature is their long stroke in respect to their shortness but even though the CMP cylinders represent the widest range of low profile spring return cylinders. All cylinders have a grooved rod top and two threaded holes for the mounting of the tilt saddle. Holes at the bottom of the cylinder are available as an extra and the wiper avoids the prenetration of dirt.

 

OPERATIONAL AREAS
The small dimensions and the complete treatment against corrosion makes these cylinders ideal for lifting, levelling, supporting and pressing operations in restricted working areas and/or harsh environments.
General maintenance work, industrial assembly and construction are among the most common applications for this type of cylinder.

 

ACCESSORIES
Separate ZTT tilt saddle reduces the effects of possible off-centred loads.

 

STANDARD
Tilt saddle mounting holes.

 

OPTIONS
F version Cylinder with base mounting holes for fixing purposes.

 

♦ It’s important to drop the pressure inside the cylinder before disconnecting the quick coupler to avoid problems if re-inserting or lowering the load. In case some pressure persists it is possible to use the apposite tool KTS38.

PUSHING FORCE

  STROKE

  EFFECTIVE AREA

  OIL VOLUME

MODEL

  CLOSED HEIGHT

  Ø EXTERNAL

  Ø PISTON

  Ø ROD

COUPLER HEIGHT

ROD PROJECTION

  Ø PCD MOUNTING HOLES

  MOUNTING HOLES DEPTH

  PCD MOUNTING HOLES FOR THE TILT SADDLE

  MOUNTING HOLES FOR THE TILT SADDLE

  WEIGHT

* Nominal value, for precise capacity see kN

t*
kN

mm

cm²

cm3

A
mm

D
mm

E
mm

F
mm

H
mm

K
mm

U
mm

V / Z
mm

W
mm

S
mm

kg

10
111

25

15,9

40

CMP10N25

72

75

45

35

19

1

25

2xM8
6

24

2xM5

2,5

50

80

CMP10N50

97

3,2

20
198

25

28,3

71

CMP20N25

75

88

60

45

19

1

60

2xM10
10

34

2xM5

3,4

50

141

CMP20N50

100

4,2

30
309

25

44,1

110

CMP30N25

86

102

75

55

19

1

65

2xM10
13

44

2xM5

5

50

221

CMP30N50

111

6,1

50
496

25

70,9

177

CMP50N25

97

127

95

80

22

1

95

2xM12
15

65

2xM6

7,6

50

354

CMP50N50

122

9,1

100
929

25

132,7

332

CMP100N25

116

175

130

100

22

2

140

2xM12
17

65

2xM6

17,6

50

664

CMP100N50

141

20,5

MODEL

FOR USE WITH

a

b

j

z

w

kg

ZTT10

CMP10N # # #

16 1

34

5.5 24

0.1

ZTT20

CMP20N # # #

18

43

34

0.2

ZTT30

CMP30N # # #

19

53

44

0.3

ZTT50

CMP50N # # #

25

68

6.5 65

0.9

ZTT100

CMP100N # # #

34

2

88

1.7

applications

Industry

Maintenances

All EUROPRESS products are covered by a one year guarantee against any defects in materials or workmanship. This guarantee does not cover normal wear and tear, improper use or any applications not in compliance with our recommended instructions, or where the equipment is used with unsuitable fluids, modifications and/ or alterations (including those resulting from repair or attempted repair by persons not authorized by EURO PRESS PACK), or damage caused by transportation.

To report any flaw, defect, non conformity, and/or to claim action under this guarantee, the Customer shall inform EURO PRESS PACK in writing within 5 days after receipt of the goods, or in case of hidden defect, within 5 days after such defect has been discovered. Before returning the goods to EURO PRESS PACK for possible remedy under guarantee, the purchaser shall have received EURO PRESS PACK’s authorization . If EURO PRESS PACK is firmly convinced that its own product is defective, EURO PRESS PACK will provide free of charge for repair or replacement. The transport costs to and from EURO PRESS PACK are at the customer’s charge.

If the intervention of EURO PRESS PACK personnel or of our authorized distributors is requested on the site for installation of the replaced items (provided it is ascertained that they are covered by this guarantee) the costs of transfer of such personnel, their travelling hours and travel expenses are at the Customer’s charge, whereas only the actual working hours will be at the charge of EURO PRESS PACK or of its authorized distributor.

THE ABOVE GUARANTEE IS THE ONLY GUARANTEE ACKNOWLEDGED AND RECOGNIZED BY EURO  PRESS  PACK AND IT REPLACES ANY AND ALL OTHER EXPLICIT OR IMPLICIT GUARANTEES REGARDINGTHEPRODUCTSMANUFACTURED AND MARKETED BY EURO PRESS PACK, AS TO THEIR MARKETABILITY OR SUITABILITY FOR SPECIFIC APPLICATIONS.

IT IS HEREBY EXPRESSLY STATED THAT ANY CHARGES AND/OR LIABILITY OF EURO PRESS PACK ARE EXCLUDED REGARDING:

  • ANY ACCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY DEFECTIVE OR NON CONFORMING PRODUCTS, BY NEGLIGENCE OR OTHERWISE;
  • DAMAGE DUE TO  OTHER  CAUSES INCLUDING,  BUT  NOT LIMITED TO NEGLIGENCE OF EURO PRESS PACK;
  • ANY OTHER OBLIGATION OR LIABILITY DERIVING FROM BREACH OF CONTRACT OR OF GUARANTEE.

THIS GUARANTEE WILL NOT BE EFFECTIVE IN CASE OF EVEN PARTIAL DEFAULT IN PAYMENT FOR THE SUPPLIED GOODS, INCLUDING INVOICES FOR TECHNICAL ASSISTANCE SERVICES.

The maximum amount payable by EURO PRESS PACK for damages will at all events be limited to the actually paid purchase price and shall therefore never exceed this price.

I In case of goods lost during transport, please contact the company within 30 days of loss: sales@europresspack.it

QUALITY CERTIFICATION
Euro Press Pack has always been a Company very attentive to quality norms. This means that both the design of our products than their manufacturing are planned considering the Good Manufacturing Practice.All necessary controls are made to grant our customers the highest possible quality standard. In this way the final product is produced and checked according to the defined procedures and this assures that the quality system is efficient, controlled and proved.

QUALITY SYSTEM CERTIFICATE ISO 9001
Certification for design, manufacturing, marketing and repair of high pressure components.

ENVIRONMETAL SYSTEM CERTIFICATE ISO 14001
System certification for design and manufacture, through the various step of cutting, mechanical machining, surface treatments, painting, assembly, testing, packing and dispatch, sales and service of high pressure hydraulic fluid components.

ANSI B30.1
All cylinders comply to the standard laid down by the American National Standards institute (apart from CGS#P#, CGG#P#, and CGR cylinders).

EN 60204-1
The electric parts of the machines are made according the standard of EN 60204-1.

SAE 100R10
The 700 bar hoses exceed this norm.

Direttive CE 2006/42/CE – CE 2006/95/CE – CE 2004/108/CE
All our power packs conform the CE norm on the machine directive, low tension and electromagnetic compatibility.

CE mark.
All EUROPRESS products meet the European safety directives. Except certain systems or utensils which are designed for a specific use and are certified as machineries, all the cylinders, pumps and power packs of generic purpose are accompanied by certificates. The CE certification is responsibility of the construction of the machinery in which all the components are assembled.

READY DELIVERY

Thanks to our speedy deliveries you don’t have the urge to place a huge stock order to assure your customers a good service