HIHT PRESSURE HOSES S-ST

HIGH PRESSURE HOSES AND HIGH PRESSURE TWIN HOSES

Hoses S

Max working pressure: 700-2800 bar

Internal diameter: 4,6 – 6,4 mm

Hoses ST

Max working pressure: 700 bar

Internal diameter: 6,4 mm

Features

Hight pressure hoses 700 – 1000 – 1800 – 2500 – 2800 bar
These hoses are suitable for all hydraulic applications and consist of 2, 4, or 6 steel wire spirals (depending on the operating pressure) which are extremely resistant to traction. Their outer polyurethane (700 bar) or polyamide (1800 and 2500 bar) cover provides excellent scraping protection and excellent efficiency is guaranteed in case of minimal expansions during operations. All the hoses with the two couplers are equipped flushed a with ISO VG 32 oil.

 

♦ The maximum operating pressure of the pump-hose-coupling system is the working pressure of the lowest rated part.

♦ Bolt tensioner hoses: SN##FT (with K13X coupler)
Torque wrenche hoses: SQ##FM (male coupler on one side and female coupler on the other)

♦ The oil volume required to fill the hoses needs to be taken into account when selecting the pump model.

 

Hight pressure twin hoses 700 bar
These hoses are suitable for torque wrenches and double acting cylinders (oil return), they are composed of two steel spirals extremely resistant to traction. The external polyurethanecovering guarantees an excellent protection to abrasions and scrapings while the minimum exercise expansions ensure the maximum efficiency of the system. All the hoses with the two couplers are equipped flushed a with ISO VG 32 oil. All the hoses ending with double couplers are already flushed with ISO VG 32 oil.

 

♦ The maximum operating pressure of the pump-hose-coupling system is the working pressure of the lowest rated part.

♦ The oil volume required to fill the hoses needs to be taken into account when selecting the pump model.

Model Max working pressure Fitting thread Lenght Coupling – A side Coupling – B side Nipple Min burst pressure Safety factor @ 700 bar Safety factor @ 1000 bar Internal diameter Min. bending radius Oil volume Weight
bar mm mm

cm3/m

kg/m

SN10 1000

3/8’’ NPT – 3/8’’ NPT male

10 = 1 m
20 = 1,8 m 30 = 3 m etc.

2800 4 2,8 6,4 70 32,2 0,32
SN10M 700 K73M
SN10MM K73M K73M
SN10HT 700@120°C 3/8’’ NPT – 3/8’’ NPT male 40 0,25
SQ10 1000 1/4’’ NPT – 1/4’’ NPT male 70 0,32
SQ10M 700 K71M
SQ10MM K71M K71M
SR10 1000 1/4’’ BSP – 1/4’’ BSP swivel female

Model Max working pressure Fitting thread Lenght Coupler end one Coupler end two Nipple Min. burst pressure Safety factor @ 700 bar Internal diameter Min. bending radius Oil volume Weight
bar mm mm

cm3/m

kg/m

SM10 1800

1/4’’ BSP – 1/4’’ BSP swivel female

10 = 1 m
20 = 1,8 m 30 = 3 m etc.

4500 2,5 4,8 130 18 0,28
SM10P RN32
SH10 2500 6250 175 0,41
SH10P RN51
SH10H 2800 7000 4,6 220 16,6 0,56
Model Max working pressure Fitting thread Lenght Hose A Hose R Min. burst pressure Safety factor @ 700 Internal diameter Min. bending radius Oil volume Weight
Coupling – A side Coupling – B side Coupling – A side Coupling – B side
bar mm mm

cm3/m

kg/m

STN10 1000

3/8’’ NPT – 3/8’’ NPT male

10 = 1 m
20 = 1,8 m 30 = 3 m etc.

2800 4 6,4 70 32,2 0,320,250,32
STN10M 700 K73M K73M
STN10MM K73M K73M K73M K73M
STN10FM K73M K73X K73X K73M
STQ10 1000 1/4’’ NPT – 1/4’’ NPT male
STQ10M 700 K71M K71M
STQ10MM K71M K71M K71M K71M
STQ10FM K71M K71X K71X K71M
STQ10W K71X K71X K71M K71M

applications

All EUROPRESS products are covered by a one year guarantee against any defects in materials or workmanship. This guarantee does not cover normal wear and tear, improper use or any applications not in compliance with our recommended instructions, or where the equipment is used with unsuitable fluids, modifications and/ or alterations (including those resulting from repair or attempted repair by persons not authorized by EURO PRESS PACK), or damage caused by transportation.

To report any flaw, defect, non conformity, and/or to claim action under this guarantee, the Customer shall inform EURO PRESS PACK in writing within 5 days after receipt of the goods, or in case of hidden defect, within 5 days after such defect has been discovered. Before returning the goods to EURO PRESS PACK for possible remedy under guarantee, the purchaser shall have received EURO PRESS PACK’s authorization . If EURO PRESS PACK is firmly convinced that its own product is defective, EURO PRESS PACK will provide free of charge for repair or replacement. The transport costs to and from EURO PRESS PACK are at the customer’s charge.

If the intervention of EURO PRESS PACK personnel or of our authorized distributors is requested on the site for installation of the replaced items (provided it is ascertained that they are covered by this guarantee) the costs of transfer of such personnel, their travelling hours and travel expenses are at the Customer’s charge, whereas only the actual working hours will be at the charge of EURO PRESS PACK or of its authorized distributor.

THE ABOVE GUARANTEE IS THE ONLY GUARANTEE ACKNOWLEDGED AND RECOGNIZED BY EURO  PRESS  PACK AND IT REPLACES ANY AND ALL OTHER EXPLICIT OR IMPLICIT GUARANTEES REGARDINGTHEPRODUCTSMANUFACTURED AND MARKETED BY EURO PRESS PACK, AS TO THEIR MARKETABILITY OR SUITABILITY FOR SPECIFIC APPLICATIONS.

IT IS HEREBY EXPRESSLY STATED THAT ANY CHARGES AND/OR LIABILITY OF EURO PRESS PACK ARE EXCLUDED REGARDING:

  • ANY ACCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY DEFECTIVE OR NON CONFORMING PRODUCTS, BY NEGLIGENCE OR OTHERWISE;
  • DAMAGE DUE TO  OTHER  CAUSES INCLUDING,  BUT  NOT LIMITED TO NEGLIGENCE OF EURO PRESS PACK;
  • ANY OTHER OBLIGATION OR LIABILITY DERIVING FROM BREACH OF CONTRACT OR OF GUARANTEE.

THIS GUARANTEE WILL NOT BE EFFECTIVE IN CASE OF EVEN PARTIAL DEFAULT IN PAYMENT FOR THE SUPPLIED GOODS, INCLUDING INVOICES FOR TECHNICAL ASSISTANCE SERVICES.

The maximum amount payable by EURO PRESS PACK for damages will at all events be limited to the actually paid purchase price and shall therefore never exceed this price.

I In case of goods lost during transport, please contact the company within 30 days of loss: sales@europresspack.it

QUALITY CERTIFICATION
Euro Press Pack has always been a Company very attentive to quality norms. This means that both the design of our products than their manufacturing are planned considering the Good Manufacturing Practice.All necessary controls are made to grant our customers the highest possible quality standard. In this way the final product is produced and checked according to the defined procedures and this assures that the quality system is efficient, controlled and proved.

QUALITY SYSTEM CERTIFICATE ISO 9001
Certification for design, manufacturing, marketing and repair of high pressure components.

ENVIRONMETAL SYSTEM CERTIFICATE ISO 14001
System certification for design and manufacture, through the various step of cutting, mechanical machining, surface treatments, painting, assembly, testing, packing and dispatch, sales and service of high pressure hydraulic fluid components.

ANSI B30.1
All cylinders comply to the standard laid down by the American National Standards institute (apart from CGS#P#, CGG#P#, and CGR cylinders).

EN 60204-1
The electric parts of the machines are made according the standard of EN 60204-1.

SAE 100R10
The 700 bar hoses exceed this norm.

Direttive CE 2006/42/CE – CE 2006/95/CE – CE 2004/108/CE
All our power packs conform the CE norm on the machine directive, low tension and electromagnetic compatibility.

CE mark.
All EUROPRESS products meet the European safety directives. Except certain systems or utensils which are designed for a specific use and are certified as machineries, all the cylinders, pumps and power packs of generic purpose are accompanied by certificates. The CE certification is responsibility of the construction of the machinery in which all the components are assembled.

READY DELIVERY

Thanks to our speedy deliveries you don’t have the urge to place a huge stock order to assure your customers a good service