CGG#N

CYLINDERS, LOAD RETURN WITH END OF STROKE NUT – HIGH TONNAGE

force: 30-500t

stroke: 25-300mm

max working pressure: 700bar

Features

These cylinders are particularly suitable for applications in which the load has to be supported for long periods. The lock nut can be screwed down onto the cylinder body to hold the load mechanically. This ensures that it’s absolutely safe to operate under load.
CGG cylinders have concentric grooves machined on the end of the rod to improve the load grip, models above 30 ton have lifting eyelets to facilitate their transport.
From 50 ton upwards, the cylinders are plunging type (P version) and have a system which prevents any possible over-stroke. The rod has a coloured zone which becomes visible 10 mm before the end of the piston stroke.
All models can operate with off-centred load up to 8% of their nominal capacity.

OPERATIONAL AREAS
The ideal use for these cylinders is in the Construction Industry for example, bridge repairs and constructions and in the building and maintenance of heavy structural works. The anti-corrosion treatment applied to these cylinders makes them suitable for use in harsh and adverse environments.

OPTIONS
– T version, cylinder with integrated tilt saddle.
– F version, cylinder with mounting holes for fixing purposes at the bottom.
– N version, (optional starting from 50 t) cylinders with end of stroke ring nut.
This version is in compliance with ANSI B30.1.
– M version, cylinder with spring return.
This version is available for N – version cylinders up to 150 tons (i.e., CMG50N100).

ACCESSORIES
ZTT tilt saddle reduces the effects of any possible off-centred load.

♦ Whenever working space is restricted, CGR low profile cylinders offer a perfect solution.

♦ For the P version cylinders without end of stroke nut, it is very important that the operator is in position to observe when the coloured zone of the piston appears, indicating the end of the piston stroke.

♦ It’s important to drop the pressure inside the cylinder before disconnecting the quick coupler to avoid problems if re-inserting or lowering the load. In case some pressure persists it is possible to use the apposite tool KTS38 in order to lower the pressure in the couplers.

Selection chart

PUSHING FORCE	STROKE	EFFECTIVE AREA	OIL VOLUME	MODEL	CLOSED HEIGHT	CLOSED HEIGHT WITH INTEGRATED TILT SADDLE	Ø EXTERNAL	Ø PISTON	Ø ROD VERSION P	Ø ROD VERSION N	COUPLER HEIGHT	ØINTEGRATED TILT SADDLE	ROD PROJECTION	ROD PROJECTION WITH INTEGRATED TILT SADDLE	Ø PCD MUNTING HOLES	MOUNTING HOLES DEPTH	WEIGHT	* Valore nominale, per la capacità precisa vedere kN
t* kN	mm	cm²	cm³	MODEL	A mm	A1 mm	D mm	E mm	F mm	F1 mm	H mm	J mm	K mm	K1 mm	U mm	V / Z mm	kg
30 309	100	44.1	442	CGG30N100	189	193	102	75	–	Tr 65 x6	19	53	1	5	65	2xM10 13	11
50 496	50	70.9	355	CGG50P50	158	163	127	95	Tr 95 x6	Tr 85 x6	22	68	1	6	95	2xM12 15	15,5
	100		709	CGG50P100	208	213											20
	150		1063	CGG50P150	258	263											25
100 929	100	132.7	1327	CGG100P100	236	243	175	130	Tr 130 x10	Tr 110 x10	22	88	2	9	130	2xM12 17	44
100 929	150	132.7	1991	CGG100P150	286	293	175	130	Tr 130 x10	Tr 110 x10	22	88	2	9	130	2xM12 17	53,5
150 1407	25	201	503	CGG150P25	184	193	213	160	Tr 160 x10	Tr 130 x10	30	118	3	12	130	4xM12 17	51
	50		1005	CGG150P50	209	218											58
	100		2011	CGG150P100	259	268											72
	150		3016	CGG150P150	309	318											86
	200		4021	CGG150P200	359	368											100
	250		5026	CGG150P250	409	418											114
200 1984	25	283.4	709	CGG200P25	205	214	252	190	Tr 190 x10	Tr 165 x10	32	148	3	12	140	4xM16 20	80
	50		1418	CGG200P50	230	239											90
	100		2835	CGG200P100	280	289											109
	150		4253	CGG200P150	330	339											129
	200		5670	CGG200P200	380	389											148
	250		7088	CGG200P250	430	439											168
	300		8506	CGG200P300	480	489											187

Selection chart

PUSHING FORCE	STROKE	EFFECTIVE AREA	OIL VOLUME	MODEL	CLOSED HEIGHT	CLOSED HEIGH WITH INTEGRATED TILT SADDLE	Ø EXTERNAL	Ø PISTON	Ø ROD VERSION P	Ø ROD VERSION N	COUPLER HEIGHT	Ø INTEGRATED TILT SADDLE	ROD PROJECTION	ROD PROJECTION WITH INTEGRATED TILT SADDLE	Ø PCD MOUNTING HOLES	MOUNTING HOLES DEPTH	WEIGHT
t* kN	mm	cm²	cm3	MODEL	A mm	A1 mm	D mm	E mm	F mm	F1 mm	H mm	J mm	K mm	K1 mm	U mm	V / Z mm	kg
250 2424	25		866	CGG250P25	224	233	280	210	Tr 210 x10	Tr 175 x10	34	158	3	12	150	4xM16 20	108
	50		1732	CGG250P50	249	258											120
	100	346.3	3464	CGG250P100	299	308											144
	150		5195	CGG250P150	349	358											168
	200		6927	CGG250P200	399	408											192
	250		8659	CGG250P250	449	458											217
	300		10391	CGG250P300	499	508											241
300 2908	25		1039	CGG300P25	240	249	305	230	Tr 230 x10	Tr 195 x10	38	158	3	12	170	4xM16 20	137
	50		2077	CGG300P50	265	274											152
	100	415.4	4155	CGG300P100	315	324											180
	150		6232	CGG300P150	365	374											209
	200		8310	CGG300P200	415	424											238
	250		10387	CGG300P250	465	474											266
	300		12464	CGG300P300	515	524											295
350 3436	25		1227	CGG350P25	250	262	332	250	Tr 250 x10	Tr 215 x10	42	196	3	15	200	4xM16 20	170
	50		2454	CGG350P50	275	287											187
	100	4909.6	4909	CGG350P100	325	337											221
	150		7363	CGG350P150	375	387											255
	200		9818	CGG350P200	425	437											289
	250		12272	CGG350P250	475	487											322
	300		14726	CGG350P300	525	537											356

Selection chart

PUSHING FORCE	STROKE	EFFECTIVE AREA	OIL VOLUME	MODEL	CLOSED HEIGTH	CLOSED HEIGTH WITH INTEGRATED TILT SADDLE	Ø EXTERNA	Ø PISTON	Ø ROD VERSION P	Ø ROD VERSION N	COUPLER HEIGHT	Ø INTEGRATED TILT SADDLE	ROD PROJECTION	ROD PROJECTION WITH INTEGRATED TILT SADDLE	Ø PCD MOUNTING HOLES	MOUNTING HOLES DEPTH	WEIGHT	capacità precisa vedere kN
t* kN	mm	cm²	cm3	MODEL	A mm	A1 mm	D mm	E mm	F mm	F1 mm	H mm	J mm	K mm	K1 mm	U mm	V / Z mm	kg
400 4008	25	572.6	1431	CGG400P25	260	272	356	270	Tr 270 x10	Tr 235 x10	42	196	3	15	230	4xM16 20	203
	50		2863	CGG400P50	285	297											222
	100		5726	CGG400P100	335	347											261
	150		8588	CGG400P150	385	397											300
	200		11451	CGG400P200	435	447											298
	250		14314	CGG400P250	485	497											379
	300		17177	CGG400P300	535	547											418
500 4948	25	706.9	1767	CGG500P25	275	287	396	300	Tr 300 x10	Tr 260 x10	50	196	3	15	250	4xM16 20	265
	50		3534	CGG500P50	300	312											290
	100		7069	CGG500P100	350	362											338
	150		10603	CGG500P150	400	412											386
	200		14137	CGG500P200	450	462											435
	250		17651	CGG500P250	500	512											483
	300		21206	CGG500P300	550	562											531

Accessories: ZTT tilt saddles

MODEL	FOR USE WITH	a	b	j	z	kg
ZTT30	CGG30N100	19	1	53	M5	0.3
ZTT50	CGG50 # # # #	25	1	68	M8	0.9
ZTT100	CGG100 # # # #	34	2	88	M10	1.7
ZTT150	CGG150 # # # #	45	3	118		3.4
ZTT200	CGG200 # # # #	54	3	148		7
ZTT250	CGG250 # # # #	58		158		9.5
ZTT300	CGG300 # # # #	58		158		11.3
ZTT350	CGG350 # # # #	71		196	M12	18
ZTT400	CGG400 # # # #					20.7
ZTT500	CGG500 # # # #					23.8

applications

All EUROPRESS products are covered by a one year guarantee against any defects in materials or workmanship. This guarantee does not cover normal wear and tear, improper use or any applications not in compliance with our recommended instructions, or where the equipment is used with unsuitable fluids, modifications and/ or alterations (including those resulting from repair or attempted repair by persons not authorized by EURO PRESS PACK), or damage caused by transportation.

To report any flaw, defect, non conformity, and/or to claim action under this guarantee, the Customer shall inform EURO PRESS PACK in writing within 5 days after receipt of the goods, or in case of hidden defect, within 5 days after such defect has been discovered. Before returning the goods to EURO PRESS PACK for possible remedy under guarantee, the purchaser shall have received EURO PRESS PACK’s authorization . If EURO PRESS PACK is firmly convinced that its own product is defective, EURO PRESS PACK will provide free of charge for repair or replacement. The transport costs to and from EURO PRESS PACK are at the customer’s charge.

If the intervention of EURO PRESS PACK personnel or of our authorized distributors is requested on the site for installation of the replaced items (provided it is ascertained that they are covered by this guarantee) the costs of transfer of such personnel, their travelling hours and travel expenses are at the Customer’s charge, whereas only the actual working hours will be at the charge of EURO PRESS PACK or of its authorized distributor.

THE ABOVE GUARANTEE IS THE ONLY GUARANTEE ACKNOWLEDGED AND RECOGNIZED BY EURO PRESS PACK AND IT REPLACES ANY AND ALL OTHER EXPLICIT OR IMPLICIT GUARANTEES REGARDINGTHEPRODUCTSMANUFACTURED AND MARKETED BY EURO PRESS PACK, AS TO THEIR MARKETABILITY OR SUITABILITY FOR SPECIFIC APPLICATIONS.

IT IS HEREBY EXPRESSLY STATED THAT ANY CHARGES AND/OR LIABILITY OF EURO PRESS PACK ARE EXCLUDED REGARDING:

ANY ACCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY DEFECTIVE OR NON CONFORMING PRODUCTS, BY NEGLIGENCE OR OTHERWISE;
DAMAGE DUE TO OTHER CAUSES INCLUDING, BUT NOT LIMITED TO NEGLIGENCE OF EURO PRESS PACK;
ANY OTHER OBLIGATION OR LIABILITY DERIVING FROM BREACH OF CONTRACT OR OF GUARANTEE.

THIS GUARANTEE WILL NOT BE EFFECTIVE IN CASE OF EVEN PARTIAL DEFAULT IN PAYMENT FOR THE SUPPLIED GOODS, INCLUDING INVOICES FOR TECHNICAL ASSISTANCE SERVICES.

The maximum amount payable by EURO PRESS PACK for damages will at all events be limited to the actually paid purchase price and shall therefore never exceed this price.

I In case of goods lost during transport, please contact the company within 30 days of loss: sales@europresspack.it

QUALITY CERTIFICATION
Euro Press Pack has always been a Company very attentive to quality norms. This means that both the design of our products than their manufacturing are planned considering the Good Manufacturing Practice.All necessary controls are made to grant our customers the highest possible quality standard. In this way the final product is produced and checked according to the defined procedures and this assures that the quality system is efficient, controlled and proved.

QUALITY SYSTEM CERTIFICATE ISO 9001
Certification for design, manufacturing, marketing and repair of high pressure components.

ENVIRONMETAL SYSTEM CERTIFICATE ISO 14001
System certification for design and manufacture, through the various step of cutting, mechanical machining, surface treatments, painting, assembly, testing, packing and dispatch, sales and service of high pressure hydraulic fluid components.

ANSI B30.1
All cylinders comply to the standard laid down by the American National Standards institute (apart from CGS#P#, CGG#P#, and CGR cylinders).

EN 60204-1
The electric parts of the machines are made according the standard of EN 60204-1.

SAE 100R10
The 700 bar hoses exceed this norm.

Direttive CE 2006/42/CE – CE 2006/95/CE – CE 2004/108/CE
All our power packs conform the CE norm on the machine directive, low tension and electromagnetic compatibility.

CE mark.
All EUROPRESS products meet the European safety directives. Except certain systems or utensils which are designed for a specific use and are certified as machineries, all the cylinders, pumps and power packs of generic purpose are accompanied by certificates. The CE certification is responsibility of the construction of the machinery in which all the components are assembled.

READY DELIVERY

Thanks to our speedy deliveries you don’t have the urge to place a huge stock order to assure your customers a good service

CGG#N

CYLINDERS, LOAD RETURN WITH END OF STROKE NUT – HIGH TONNAGE

Features

applications

constructions

Tunneling

Industry

Ship building

Maintenances

READY DELIVERY