Reservoir capacity: 5 – 60 l
Delivery at 700 bar: 0,45-0,9 l/min
Power rating: 0,75-1,5 KW
Max pressure: 700 bar
These hydraulic power packs are designed to be modular in order to guarantee the complete interchangeability of the components. Thanks to this feature it is possible to order customized models. The top plate is used as a base on which to mount all the modular components (valves, and accessories). The valves are also mounted on a plate to allow the pressure adjustment on the return line.
The power packs are manufactured under high quality controls to ensure:
– Safety: The valves are set in our Factory and each component is in compliance with “2006/42/CE Machine Directive” and its following amendments. Furthermore they are CE marked in relation to the 2014/30 UE norms (electromagnetic compatible) and 2014/35 UE (low tension);
– Life: The components are all carefully chosen and this ensures excellent performance results, Power/weight ratio, and limited dimensional requirements and easy maintenance ;
– Environment: They are easy to use, the are quiet, reliable and guarantee the maximum performance.
The various models consist of:
– Motor , available in four versions: three-phase electric, single phase electric, petrol engine and air motor. Furthermore our electric motors are provided with magneto-thermal cut-out with 0 voltage disconnection, complete with 5 m power cord, CEE plug and Class IP54 protection ;
– Pump available in 12 versions from 0,45 to 10 l/min ;
– Relief valve adjustable from outside on all pumps and various types of manual, electric, air-operated and spring centred valves at your choice ;
– Tank from 5 to 50 litres ;
– Options to customize the power unit.
Check the chart on the next page for the correct interpretation of the hydraulic power units.
OPERATIONAL AREAS
They are essential for lifting and jacking systems with single and double acting cylinders and for all heavy duty or complex operations that cannot be performed with manual pumps.
♦ A large range of options are available with these power packs.
♦ Refer to section “How to choose a pump” to determine the correct matching pump/cylinder.
|
MODEL |
DELIVERY |
PRESSURE |
MOTOR |
||||
|
1° Stage |
2° Stage |
1° Stage |
2° Stage |
Voltage |
Power |
Speed |
|
|
l/min |
l/min |
bar |
bar |
kW |
rpm |
||
|
MMA |
0.9 |
0.45 |
100 |
700 |
230V – 50 Hz ( motor with differt voltage on request) |
0.75 |
1400 |
|
MMB |
4.7 |
85 |
|||||
|
MMC (1) |
– |
0.9 |
– |
1.5 |
|||
|
MMD |
1.8 |
100 |
2800 |
||||
|
MMH (1) |
2.4 |
85 |
1400 |
||||
|
MME |
9.4 |
2800 |
|||||
|
RESERVOIR CAPACITY |
USABLE OIL VOLUME |
DIMENSION mm |
||||||||||
|
litres |
litres |
A |
A1② |
B |
B1 |
C |
D |
E |
F |
G |
H ① |
I |
|
5 |
3,5 |
370 |
470 |
245 |
270 |
129 |
315 |
250 |
170 |
M8 |
410 |
10 |
|
10 high |
9 |
227 |
508 |
|||||||||
|
10 low |
7,5 |
447 |
– |
360 |
378 |
129 |
410 |
320 |
270 |
410 |
||
|
20 |
17,5 |
– |
257 |
Ø9 |
538 |
40 |
||||||
|
40 |
34 |
440 |
362 |
642 |
||||||||
|
60 |
60 |
457 |
600 |
440 |
350 |
510 |
||||||
All EUROPRESS products are covered by a one year guarantee against any defects in materials or workmanship. This guarantee does not cover normal wear and tear, improper use or any applications not in compliance with our recommended instructions, or where the equipment is used with unsuitable fluids, modifications and/ or alterations (including those resulting from repair or attempted repair by persons not authorized by EURO PRESS PACK), or damage caused by transportation.
To report any flaw, defect, non conformity, and/or to claim action under this guarantee, the Customer shall inform EURO PRESS PACK in writing within 5 days after receipt of the goods, or in case of hidden defect, within 5 days after such defect has been discovered. Before returning the goods to EURO PRESS PACK for possible remedy under guarantee, the purchaser shall have received EURO PRESS PACK’s authorization . If EURO PRESS PACK is firmly convinced that its own product is defective, EURO PRESS PACK will provide free of charge for repair or replacement. The transport costs to and from EURO PRESS PACK are at the customer’s charge.
If the intervention of EURO PRESS PACK personnel or of our authorized distributors is requested on the site for installation of the replaced items (provided it is ascertained that they are covered by this guarantee) the costs of transfer of such personnel, their travelling hours and travel expenses are at the Customer’s charge, whereas only the actual working hours will be at the charge of EURO PRESS PACK or of its authorized distributor.
THE ABOVE GUARANTEE IS THE ONLY GUARANTEE ACKNOWLEDGED AND RECOGNIZED BY EURO PRESS PACK AND IT REPLACES ANY AND ALL OTHER EXPLICIT OR IMPLICIT GUARANTEES REGARDINGTHEPRODUCTSMANUFACTURED AND MARKETED BY EURO PRESS PACK, AS TO THEIR MARKETABILITY OR SUITABILITY FOR SPECIFIC APPLICATIONS.
IT IS HEREBY EXPRESSLY STATED THAT ANY CHARGES AND/OR LIABILITY OF EURO PRESS PACK ARE EXCLUDED REGARDING:
THIS GUARANTEE WILL NOT BE EFFECTIVE IN CASE OF EVEN PARTIAL DEFAULT IN PAYMENT FOR THE SUPPLIED GOODS, INCLUDING INVOICES FOR TECHNICAL ASSISTANCE SERVICES.
The maximum amount payable by EURO PRESS PACK for damages will at all events be limited to the actually paid purchase price and shall therefore never exceed this price.
I In case of goods lost during transport, please contact the company within 30 days of loss: sales@europresspack.it
QUALITY CERTIFICATION
Euro Press Pack has always been a Company very attentive to quality norms. This means that both the design of our products than their manufacturing are planned considering the Good Manufacturing Practice.All necessary controls are made to grant our customers the highest possible quality standard. In this way the final product is produced and checked according to the defined procedures and this assures that the quality system is efficient, controlled and proved.
QUALITY SYSTEM CERTIFICATE ISO 9001
Certification for design, manufacturing, marketing and repair of high pressure components.
ENVIRONMETAL SYSTEM CERTIFICATE ISO 14001
System certification for design and manufacture, through the various step of cutting, mechanical machining, surface treatments, painting, assembly, testing, packing and dispatch, sales and service of high pressure hydraulic fluid components.
ANSI B30.1
All cylinders comply to the standard laid down by the American National Standards institute (apart from CGS#P#, CGG#P#, and CGR cylinders).
EN 60204-1
The electric parts of the machines are made according the standard of EN 60204-1.
SAE 100R10
The 700 bar hoses exceed this norm.
Direttive CE 2006/42/CE – CE 2006/95/CE – CE 2004/108/CE
All our power packs conform the CE norm on the machine directive, low tension and electromagnetic compatibility.
CE mark.
All EUROPRESS products meet the European safety directives. Except certain systems or utensils which are designed for a specific use and are certified as machineries, all the cylinders, pumps and power packs of generic purpose are accompanied by certificates. The CE certification is responsibility of the construction of the machinery in which all the components are assembled.
Thanks to our speedy deliveries you don’t have the urge to place a huge stock order to assure your customers a good service
